Fluke Pressure Calibration Tools Pressure Calibrators 718 300G Pressure Calibrator
Similar Types : Fluke 750P, Fluke 754, Fluke 753, Fluke 726, Fluke 725, Fluke 725Ex, Fluke 719, Fluke 700PTPK, Fluke 700HTPK, Fluke 700G, Fluke 721, Fluke 719Pro, Fluke 717, Fluke 718, Fluke 718Ex, Fluke 3130-G2M, Fluke 3130-G2M, Fluke P3000, Fluke P3100, Fluke P3800, Fluke P3200, Fluke P5510, Fluke P5513, Fluke P5514, Fluke P5515, Fluke E-DWT
The Fluke 718 Pressure Calibrator provides total pressure calibration solutions for transmitters, gauges, and switches.
The complete solution to pressure calibration
The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
Features
Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
Error % calculation for quicker pass/fail decision making in the field
Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage
Min/Max/Hold to capture changing measurements
Switch test feature for quicker and more accurate pressure switch testing
New 1 and 300 psi pressure ranges mean fewer extra tools required
1, 30, 100 & 300 psi ranges now available
|
Technical Specifications
|
|
|
Fluke 718 Series
|
(Internal sensor)
|
|
Measure pressure
|
0.025% full scale
|
|
Functions
|
Zero, min/max, hold, damp
|
|
Dry air, non-corrosives only
|
|
|
Fluke 718 1G
|
|
|
Range
|
-1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
|
|
Resolution
|
0.0001 psi, 0.001 mbar, 0.0001 kPa
|
|
Over pressure
|
5x Full Scale
|
|
Functions
|
Zero, Min, Max, Hold, Damp
|
|
Fluke 718 30G
|
|
|
Range
|
-12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)
|
|
Resolution
|
0.001 psi, 0.1 mbar, 0.01 kPa
|
|
Over pressure
|
5x Full Scale
|
|
Functions
|
Zero, Min, Max, Hold, Damp
|
|
Fluke 718 100G
|
|
|
Range
|
-12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
|
|
Resolution
|
0.01 psi, 0.1 mbar, 0.01 kPa
|
|
Over pressure
|
2x Full Scale
|
|
Functions
|
Zero, Min, Max, Hold, Damp
|
|
Fluke 718 300G
|
|
|
Range
|
Functions
|
|
Resolution
|
0.01 psi, 1 mbar, 0.1 kPa
|
|
Over pressure
|
375 psi 25 bar
|
|
Functions
|
Zero, Min, Max, Hold, Damp
|
|
Fluke 718 series via 700 Series Pressure Modules
|
|
|
Range
|
29 pressure modules, 0 – 1 inH20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs
|
|
Resolution
|
Per pressure module specs
|
|
Accuracy
|
To 0.025% of full span, per pressure module specs
|
|
Functions
|
Zero, Min, Max, Hold, Damp
|
|
Media compatibility per pressure module specs
|
|
|
Fluke 718 Series Via Built in Pump
|
|
|
Range
|
-12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm
|
|
Loop power range
|
24 V DC
|
|
Accuracy
|
±10%
|
|
Drive; 20 mA into 1000 Ω for battery > 6.8 V; 700 Ω for battery 5.8 to 6.8 V
|
|
|
mA Measure
|
|
|
Range
|
0 mA to 24 mA
|
|
Resolution
|
0.001 mA
|
|
Accuracy
|
0.015% + 1 count
|
|
General Specifications
|
|
|
Maximum voltage
|
30 volts (non-operating)
|
|
Temperature
|
-40°C to 60°C
|
|
Operating temperature
|
-10°C to 55°C
|
|
Relative humidity
|
95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C)
|
|
Operating altitude
|
3,000 M max
|
|
Shock
|
1 M drop test
|
|
Vibration
|
Random, 2 g, 5 Hz – 500 Hz
|
|
Safety
|
CSA C22.2 No. 1010.1: 1992
|
|
EMC
|
EN50082-1: 1992 and EN55022: 1994 Class B
|
|
Size
|
216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in)
|
|
Weight
|
992 g (35 oz)
|
|
Power, battery life
|
9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
|
|
Battery life
|
4 to 20 hours typical, depending on functions used
|
|
Warranty
|
Three years (one year on pressure pump in Fluke 718)
|
|
Display
|
LCD, 5 digit pressure and current simultaneous
|
|
For use with non-corrosive gasses
|
|
If you have any question, please do not hesitate to contact with me online
Contact details :
Shirley Sun
Sales Engineer
HONGKONG XIEYUAN TECH CO., LIMITED
Add : 7-A16, Caishen Commercial Plaza, Hangkou Railway Station, Wuhan, China
M : +86-15172506760 (WhatsApp & Wechat) | T : +86-27-85309780 | F : +86-27-85309780
Email : Shirley@whxyauto.com Skype : 169649423@qq.com
Web : www.hkxytech.com
